|
|
 |
|
PhaseCom News
May 6, 2008
PCTEL Antenna Products - New Product Update
PCTEL Antenna Products Group announces the release of several new products:
Parabolic Antennas - 24" and 36" dish antennas
Sector Panel Antennas - with vertical or horizontal polarization
Miniature Ceiling Mount Antenna - smaller than a penny!
Attached is a flyer outlining the features and benefits of these new products.
March 20, 2008
RelComm Technologies Releases New RMT Multi-Position Small Package RF Coaxial Relay
RelComm Technologies, Inc. has complimented its product line by offering a new multi-position 1P8T relay in a smaller package. The RMT Series “SMA” connectorized relay measures 1.75” Sq. x 2.00” tall (excluding connectors). This device provides greater layout and packaging density with exceptional RF performance to 18 GHz. Product is available with up to eight output positions in a failsafe or latching configuration. Options include DC header & TTL logic. Silver plated aluminum housing is available for reduced insertion loss.
Contact your PhaseCom Representative for more information.
March 3, 2008
Times Microwave Systems Announces release of LMR-LITE®, SilverLine® Approval by Anritsu and New Deburring Tool
- With a weight savings of about 30%, LMR-LITE® is becoming increasingly popular since it offers easier handling and significant savings in shipping costs where weight is a factor.
- Times' unique, patented SilverLine TuffGrip cell site test cable has been approved by Anritsu Company, maker of the well-known Site MasterTM portable analyzer. In mid-2007 Times provided full sets of TuffGrip Test Cables and TuffGrip adaptors to Anritsu who promptly fielded the product to their major accounts managers and largest customers and the feedback was immediate and positive.
- We have just introduced a new debur tool (DBT-U) which is capable of deburring all of the solid center conductor versions of LMR and T-COM ranging from LMR-195 through LMR-600. This tool will replace the DBT-01 which was limited to deburring the LMR-400 and 600 cables. The tool comes equipped with a three-sided blade allowing for a fresh cutting blade to be rotated into place twice before the cutting tip must be replaced. The combined lifetime of these three cutting surfaces is well in excess of a thousand cable terminations.
Additionally, this tool provides greatly improved ergonomics. The tool is considerably shorter than the DBT-01 and uses a screwdriver type of handle vs. the wooden ball handle that many people felt was difficult to grasp. It is also much easier to squeeze into a tool pouch or a pants pocket.
Contact your PhaseCom Representative for more information.
October 15, 2007
EMC Announces New Smaller Size and Lower Prices For Their Diamond Resitors and Terminations
EMC has released their new CT0603D termination and CR0603D 50 & 100 ohm 5% resistor. This new smaller package is 0.060 x 0.030 (1.52mm x .762 mm) for an 80 watt application.
Also released is their new pricing structure, which has lower prices on their Diamond products.
Contact your PhaseCom representative for more information.
May 22, 2007
TxRx Announces New Cost Effective In-Building Boosters
TxRx Systems, a member of Bird Technologies Group, announces the release of their new Series 62 family of signal boosters. These new signal boosters provide an exceptional balance of performance and value and are available in the following configurations:
- Single Band
- Multi-Band
- ReBandable for Public Safety Frequency Transition
- Band Selective (both contiguous and non-contiguous)
- Full or Partial Bands
Advantages of the BTG/TxRx Series 62 Family:
- Cost Effective In-Building coverage solution for:
- Public Safety
- Private Wireless networks
- Cellular
- PCS
- Paging
Low noise figure with wide dynamic range
Excellent selectivity for operation in a shared frequency band
Remote monitoring option
For technical details on the whole series, check out the attached data sheets or visit their website at TxRx.com/Series 62 Products.
  
 
May 22, 2007
MAXRAD SLAMS PARABOLIC ANTENNA PRICING WITH NEW, SUPERIOR PRODUCT
PCTECL introduces its new MAXRAD Brand MPRC series of parabolic antennas.
Features and Benefits:
• The mount is designed for right or left side pipe mounting, allowing easy access to the connector. This offset mounting design also provides space so cables can be properly installed without excessive bending.
• Rear-mounted feed allows the feed to be removed without removing the radome, which makes maintenance simple and less costly.
• Micro fine elevation adjustment mechanism makes precision alignment of the antenna easy. An optional azimuth adjustment is also available.
• Continuous polarization adjustment, coupled with the micro fine elevation adjustment provides the installer with the ability to optimize any installation.
• The robust, wide-spaced, three-point mounting structure improves dish stability, reduces reflector distortion and mechanical oscillation for better performance.
• Heavy-duty, double-saddle mounting brackets will accommodate pipe attachments ranging from 1.625” to 4.5” OD allowing outstanding mounting flexibility without having to stock multiple mounts for different size masts.
For more information, download the data sheets below.
May 16, 2007
Synergy Microwave New Compact Coupler Planar Resonator (CCPR) VCO
To overcome the limitations of VCOs based on 3D resonators using ceramic and surface-acoustic-wave (SAW) materials, the designers at Synergy Microwave Corp. have found a way to shrink planar resonators while also applying a unique evanescent mode electromagnetic coupling mechanism to improve the loaded quality factor (Q) of the couple resonators to lower the phase noise.
For more information, please see the the attached article reprint from Microwave and RF Magazine.
August 22, 2006
Bird SA-6000EX Rental Announcement
 
Would you like to use the latest site measurement technology but don't want to purchase it outright?
Do you have peak demands for additional antenna sweeping equipment to meet your customer's project deadlines?
Bird Technologies Group is pleased to announce that the SA-6000EX Site Analyzer is in stock and available to rent or lease from Technical Diagnostic Services, Inc. in Arlington, TX . Bird has partnered with TDS to provide the latest site measurement solutions in a way that can reduce your monthly expenses and allow you to pay for and use the equipment only as you need it. If you have such requirements, please contact Danny Rubio at TDI and he will be happy to provide you with the Bird Site Analyzers that you need for your projects.
Danny can be reached at:
(817) 465-9494 office
(917) 465-9573 fax
danny@technicaldiagnostic.com
For technical information on the SA-6000EX site analyzer or any other of Bird's extensive RF measurement product lines, please visit the Bird website at http://www.bird-electronic.com/ or contact us, your local Bird representative, PhaseCom, Inc. in Grapevine, TX.
June 16, 2006
New Directional Panel Antenna for 4.9 - 5.9 GHz
PCTEL Antenna Products Group is pleased to announce their new MP4959 series directional panel antennas designed for applications in the growing 4.9-5.9 GHz band. A single product is available to cover requirements for Public Safety, Municipal Networks, Homeland Security, Mesh Networks, Wi-Fi and Wireless LANs in both the licensed and unlicensed (4.9 GHz & 5.8 GHz) bands.
This compact antenna is both aesthetically designed for use indoors and ruggedized for use outdoors using a variety of mounting methods. It is available in 13 dBi, 17 dBi & 21 dBi, allowing several choices to optimize coverage as well as mitigating interference from other system.
For additional information, please follow the attached link and if you have any questions concerning design, application, pricing or availability, please contact us and we will be happy to assist you.
May 30,2006
RelComm Technologies Expands EM Switch Offering at Relay Store
RelComm Technologies has been specializing in Design Enhanced Application-Specific RF Coaxial Relay Products for high-volume commercial telecommunications infrastructure, military communications and test and measurement instrumentation since 1994. They are focused on serving the communications and instrumentation marketplace and work continuously to improve product performance and reduce costs.
Now they have expanded their offering at their on-line store: www.RFRelayStore.com to better serve your small volume and prototype requirements. With this expanded inventory they can offer EM Switches with the following benefits:
- Design Enhanced For Mission Critical Communications
- Extremely Low Loss From DC to 18 GHz
- 1P1T, 1P2T, 2P2T ,Transfer, and Multi-Throw
- PCB Mount, SMA, and N-Type Connectorized
- Hot Switched Option - See RDL-2N3A8-HI
- Starting @ $49.00 each for 5-9 units
- Ship from Stock - Same Day to 36 Hours
 www.RelCommTech.com
May 10, 2006
Product Spotlight: MAXRAD 2.4 / 4.9 - 5.9 GHz Sector Panel Antenna
The PCTEL XtremeWave™ MSPDBDI244914NF sector panel antenna provides:
- Coverage of 2.4 GHz to 2.5 GHz and 4.9 GHz to 5.9 GHz frequencies in a single antenna housing.
- Dual N female bulkhead inputs that permit simultaneous operation of 4.9 GHz Public Safety, 802.11a, b, g and WiMAX radio devices.
- Rugged UV resistant housing and includes a pipe mount for outdoor installations
www.MAXRAD.com
March 15, 2006
Product Spotlight for Emerson & Cuming!
Emerson & Cuming Microwave Products has released the ECCOSORB HR and AN broadband microwave absorber and is developing a new low cost, weatherproof multilayer absorber. These lightweight, flexible, broadband absorbers are cost effective solutions for applications which require a dielectric absorber to reduce RCS, reflections from a structure or minimize antenna backlobes . A similar product, ECCOSORB LS, which is a lightweight, inexpensive, dielectric foam is excellent for antenna isolation and in reducing cavity resonances in the 1-26 GHz range.
At the module level, both rubber and foam based absorbers are available. Non-conductive, magnetically loaded silicones such as ECCOSORB MCS, GDS and BSR and dielectric foams such as ECCOSORB LS and QR offer excellent low frequency performance in reducing oscillations, cavity resonances, and surface currents as low as 800 MHz. Both are available with a peel and stick option and can be easily cut into custom configurations.
For more information on these products, view the datasheets below. For information on other Emerson & Cuming products, follow the link below to their website.
www.eccosorb.com       
February 20, 2006
Florida RF Labs® Releases New SMT n-Way Power Dividers
Florida RF Labs® Wilkinson SMT Power Dividers are high-power in-phase devices capable of combining and dividing 2-, 3-, and 4-way signals. The devices provide excellent isolation and low VSWR in a small surface mount package. They range in frequency from 420 MHz to 2.4 GHz and are lead free and RoHS compliant.
For more information, visit their website at the link below, or view the Power Divider section of their catalog:
http://www.rflabs.com/microwavepassivecomponents-s26.html 
December 19, 2005
New LMR Catalog from Times Microwave Systems
Times Microwave Systems announces the availability of the new 2006 11th edition of the LMR® Wireless Products Catalog. The new catalog includes the entire range of LMR® cables including LMR-DB, LMR-FR, LMR-PVC, LMR-MA, LMR-Ultraflex, LMR-W, LMR-LLPL and LMR-75 as well as TCOM® (low PIM cable), FBT® low loss, high power cables, and T-RAD™ leaky feeder cables. The latest connectors, accessories and installation tools have also been added as well as a handy pullout comparison reference chart detailing attenuation and power handling characteristics of LMR® cables.
LMR® cables are low loss, flexible, non-kinking RF transmission line cables that utilize easy-to-install connectors and are suitable for use as antenna feeders, system jumpers and interconnects.
Included in the new catalog is the new EZ-200-NMH-D (3190-1918), which is now available from Times Microwave Systems.. This is an improved no-solder EZ crimp connector for LMR-200 and LMR-200-LLPL. The new connector has a list price of $11.80, the same as the EZ-200-NMH connector that it replaces. It has these added features and benefits:
- Combination hex/knurl coupling nut – allows tightening by hand or with a wrench
- Tri-metal plating instead of silver – eliminates tarnishing while providing superior electrical performance
- Ridged landing area on the aft end for better grip and sealing of the heat shrink boot – provides improved strain relief and weather sealing.
- Outstanding VSWR performance to 8 GHz on both LMR-200 and LMR-200-LLPL.
For more information on this new connector, you can visit Times' website at www.TimesMicrowave.com.
December 13, 2005
Introducing the ETVA (Extended Temperature Variable Attenuator) from EMC Technology
We are pleased to introduce the new ETVA (Extended Temperature Variable Attenuator) from EMC Technology. This is a much sought after extension to the long-standing TVA Thermopad® series of temperature compensating microwave absorptive attenuators. The TVA & ETVA Thermopad® products provide power dissipation that varies with temperature and can operate from DC to 3GHz. The ETVA offers extended shift, achieving greater temperature compensation beyond that of the original Thermopad® product line.
Since the ETVA offers greater shift, it can perform the attenuation level of two standard TVA's providing reduced component count and reduced insertion loss for the same level of compensation. The ETVA truly addresses the need for greater compensation in amps being driven by the increased power needs of WCDMA systems. In addition to Power Amplifiers (PA) for telecom, they can also be used in narrow-band low-frequency Military and Space applications, including IF circuits, among others.
For additional information on these or any other products from EMC Technology, please contact your EMC representative at PhaseCom or visit the EMC web site: www.emct.com.
December 6, 2005
Introducing the Diamond Termination and Resistor line from EMC Technology
We are pleased to introduce the new Diamond Termination and Resistor line from EMC Technology. This is a new line of miniature, high-power termination and resistor products for dense, high-wattage applications. They offer unprecedented levels of integration for high-power applications and are ideal for Power Amplifier (PA), Radar (JTRS) and Satellite designs where real estate and power are critical.
The Diamond Termination and Resistors can be found with the following part numbers and features:
Terminations: CT0505D, CT1310D
Resistors: CR0505D, CR1010D
Feature Benefits
12 times the power handling of BeO Enables new levels of integration of high-power systems
Frequency: DC to 18 GHz Support narrow and wide-band applications
50 and 100 mils size Reduction in board space and system cost
For additional information on these or any other products from EMC Technology, please contact your EMC representative at PhaseCom or visit the EMC web site: www.emct.com.
|
|
|
 |
 |
 |
 |
 |
Manufacturers and Products
|
 |
 |
|
 |
 |
|
|
 |
Find the right distributor near you.
|
|
|
|
|
|
 |
|
|
 |
Need catalogs? A quote? Samples?
|
|
|
|
|
|
Interesting Links
Helpful Places:
|
 |
|
 |
|